增加数组类型参数

README.md

@@ -4,7 +4,7 @@
 
 - VS2017
 - ITK5.0.1
-- CUDA
+- CUDA 11.0
 
 # 快速开始
 ## 配置说明
@@ -22,18 +22,19 @@
 
 ### socket
 * 用户向本端口发送   `CT(ct_path_name)` 即可启动该功能，例如发送 `CT(C:/CT/CT001)`
-* 待程序读取完毕后，将返回套接字 `ct upload succeed` 作为结束
+* 待程序读取完毕后，将返回套接字 `ct imported successfully` 作为结束
 
 ## 生成DRR图像数组
 
 ### socket
 * 用户必须要在接收到CT序列成功读取的信息后，才能进行该功能
-* 用户向本端口发送  `PARA(rx, ry, rz, dx, dy, threshold)` 即可启动该功能
+* 用户向本端口发送  `PARA(rx, ry, rz, dx, dy, threshold, flag)` 即可启动该功能
 * rx, ry, rz (float): 模型的绕XYZ轴的旋转角度(-180~180)
 * dx, dy (int): 生成图像的大小
 * threshold (float): DRR筛选阈值
-* 例如 `PARA(90.0, 0.0, 0.0, 1024, 1024, 0.0)`
-* DRR生成完毕后，用户将接收一个float类型的一维数组，长度为dx*dy，用来表示生成的DRR图像
+* flag (int): 选择数组的返回类型，0为float数组，1为unsigned char数组
+* 例如 `PARA(90.0, 0.0, 0.0, 1024, 1024, 0.0, 1)`
+* DRR生成完毕后，用户将接收一个一维数组，长度为dx*dy，用来表示生成的DRR图像
 
 ## 客户端示例
 参见test文件夹

cuda-drr-socket/CUDAdrr.cu

@@ -21,6 +21,7 @@ float* d_object3D;
 
 // This variable contains the 2D output from CUDA
 float *d_object2D;
+unsigned char *c_object2D;
 
 // Constants depending on the DICOM
 DEVICE_CONST int d_sizeCT[3];
@@ -72,12 +73,15 @@ void loadDICOMInGPUMemory(float *cpp_object3D, int *sizeCT, float *pixelSpacing)
 }
 
 
-void loadOuputVariablesInGPUMemory(int dimX, int dimZ)
+void loadOuputVariablesInGPUMemory(int dimX, int dimZ, int flag)
 {
 	long int vectorSize = dimX * dimZ;
 	int OutputImageSize[2] = { dimX, dimZ };
 
+	if (flag == 0)
 		cudaMalloc((void**)&d_object2D, vectorSize * sizeof(float));
+	else
+		cudaMalloc((void**)&c_object2D, vectorSize * sizeof(unsigned char));
 
 	cudaMemcpyToSymbol(DRRImageSize, OutputImageSize, 2 * sizeof(int), 0, cudaMemcpyHostToDevice);
 }
@@ -88,9 +92,12 @@ void freeDICOMFromGPUMemory()
 	cudaFree(d_object3D);
 }
 
-void freeAuxiliaryVariablesInGPUMemory()
+void freeAuxiliaryVariablesInGPUMemory(int flag)
 {
+	if (flag == 0)
 		cudaFree(d_object2D);
+	else
+		cudaFree(c_object2D);
 }
 
 __global__ void hist(float* object2D, int* range) {
@@ -104,14 +111,26 @@ __global__ void hist(float* object2D, int* range) {
 	if (idx >= total_dx * total_dz)
 		return;
 
-
 	object2D[idx] = (object2D[idx] - range[0]) / (range[1] - range[0]) * 255;
 }
 
+__global__ void hist_uc(unsigned char* object2D, int* range) {
+	int total_dx = DRRImageSize[0];
+	int total_dz = DRRImageSize[1];
 
-__global__ void drrCUDA(float* object2D, cudaTextureObject_t tex_object3D, int* hist)
-{
+	//Every thread calculates its own id number
+	long int idx = (blockIdx.x*blockDim.x) + threadIdx.x;
+
+	// This checks if the thread number is bigger than the amount of pixels
+	if (idx >= total_dx * total_dz)
+		return;
+
+	float tmp = object2D[idx];
+	object2D[idx] = (int)((tmp - range[0]) / (range[1] - range[0]) * 255);
+}
 
+
+__device__ float getPixval(cudaTextureObject_t tex_object3D, long int idx) {
 	float stepInX[3] = { d_DRR_Parameters[0],d_DRR_Parameters[1],d_DRR_Parameters[2] };
 	float stepInY[3] = { d_DRR_Parameters[3],d_DRR_Parameters[4],d_DRR_Parameters[5] };
 	float corner00[3] = { d_DRR_Parameters[6],d_DRR_Parameters[7],d_DRR_Parameters[8] };
@@ -121,13 +140,6 @@ __global__ void drrCUDA(float* object2D, cudaTextureObject_t tex_object3D, int*
 	int total_dx = DRRImageSize[0];
 	int total_dz = DRRImageSize[1];
 
-	//Every thread calculates its own id number
-	long int idx = (blockIdx.x*blockDim.x) + threadIdx.x;
-
-	// This checks if the thread number is bigger than the amount of pixels
-	if (idx >= total_dx * total_dz)
-		return;
-
 	// Converting number of pixels to rows and columns
 	int dz = idx / total_dx;
 	int dx = idx - dz * total_dx;
@@ -368,18 +380,49 @@ __global__ void drrCUDA(float* object2D, cudaTextureObject_t tex_object3D, int*
 		}
 	} //end of the while-loop
 
-	float pixval = 255.0-d12;
+	float pixval = 255.0 - d12;
 	if (pixval < 0)
 		pixval = 255.;
 
 	if (pixval > 255)
 		pixval = 0.;
 	
+	return pixval;
+}
+
+__global__ void drrCUDA(float* object2D, cudaTextureObject_t tex_object3D, int* hist)
+{
+	int total_dx = DRRImageSize[0];
+	int total_dz = DRRImageSize[1];
+	//Every thread calculates its own id number
+	long int idx = (blockIdx.x*blockDim.x) + threadIdx.x;
+
+	// This checks if the thread number is bigger than the amount of pixels
+	if (idx >= total_dx * total_dz)
+		return;
+
+	float pixval = getPixval(tex_object3D, idx);
 	int tmp = (int)pixval;
 	atomicAdd(hist + tmp, 1);
 	//Assign the calculated value for the pixel to its corresponding position in the output array
 	object2D[idx] = pixval;
+}
+
+__global__ void drrCUDA_uc(unsigned char* object2D, cudaTextureObject_t tex_object3D, int* hist) {
+	int total_dx = DRRImageSize[0];
+	int total_dz = DRRImageSize[1];
+	//Every thread calculates its own id number
+	long int idx = (blockIdx.x*blockDim.x) + threadIdx.x;
+
+	// This checks if the thread number is bigger than the amount of pixels
+	if (idx >= total_dx * total_dz)
+		return;
 
+	float pixval = getPixval(tex_object3D, idx);
+	int tmp = (int)pixval;
+	atomicAdd(hist + tmp, 1);
+	//Assign the calculated value for the pixel to its corresponding position in the output array
+	object2D[idx] = (int)pixval;
 }
 
 __global__ void cal_hist(int* hist, int* range) {
@@ -399,7 +442,7 @@ __global__ void cal_hist(int* hist, int* range) {
 	}
 }
 
-float* calculateDRRwithCUDA(CUDAParamerters CUDA_Parameters, DRRParameters DRR_Parameters)
+float* calFloatDRRwithCUDA(CUDAParamerters CUDA_Parameters, DRRParameters DRR_Parameters)
 {
 
 	cudaMemcpyToSymbol(d_DRR_Parameters, DRR_Parameters.stepInX, 15 * sizeof(float), 0, cudaMemcpyHostToDevice);
@@ -435,6 +478,42 @@ float* calculateDRRwithCUDA(CUDAParamerters CUDA_Parameters, DRRParameters DRR_P
 	return h_object2D;
 }
 
+unsigned char* calUCharDRRwithCUDA(CUDAParamerters CUDA_Parameters, DRRParameters DRR_Parameters)
+{
+
+	cudaMemcpyToSymbol(d_DRR_Parameters, DRR_Parameters.stepInX, 15 * sizeof(float), 0, cudaMemcpyHostToDevice);
+
+	//Block 6
+	int num_Threads = CUDA_Parameters.numThreads;
+	int num_Blocks = CUDA_Parameters.numBlocks;
+
+	//------------------------------------------------------------
+	//Launching the threads
+	int cpu_hist[256] = { 0 };
+	int* gpu_hist;
+	cudaMalloc((int**)&gpu_hist, 256 * sizeof(int));
+	cudaMemcpy(gpu_hist, cpu_hist, 256 * sizeof(int), cudaMemcpyHostToDevice);
+
+
+	drrCUDA_uc << < num_Blocks, num_Threads >> > (c_object2D, tex_object3D, gpu_hist);
+	cudaMemcpy(cpu_hist, gpu_hist, 256 * sizeof(int), cudaMemcpyDeviceToHost);
+
+	int* gpu_range;
+	cudaMalloc((int**)&gpu_range, 2 * sizeof(int));
+
+	cal_hist << <1, 1 >> > (gpu_hist, gpu_range);
+	hist_uc << <num_Blocks, num_Threads >> > (c_object2D, gpu_range);
+	//------------------------------------------------------------
+	cudaFree(gpu_hist);
+	cudaFree(gpu_range);
+	//Copying the result from the calculations from device to host
+	long int vectorSize = (int)DRR_Parameters.size[0] * (int)DRR_Parameters.size[1];
+	unsigned char* h_object2D = (unsigned char*)malloc(sizeof(unsigned char)*vectorSize);
+	cudaMemcpy(h_object2D, c_object2D, vectorSize * sizeof(unsigned char), cudaMemcpyDeviceToHost);
+
+	return h_object2D;
+}
+
 
 void HandleCudaKernelError(const cudaError_t CudaError, const char* pName /*= ""*/)
 {

cuda-drr-socket/CUDAdrr.cuh

@@ -39,9 +39,10 @@ struct DRRParameters
 };
 
 void loadDICOMInGPUMemory(float *cpp_object3D, int *sizeCT, float *pixelSpacing);
-void loadOuputVariablesInGPUMemory(int dimX, int dimZ);
+void loadOuputVariablesInGPUMemory(int dimX, int dimZ, int flag=0);
 void freeDICOMFromGPUMemory();
-void freeAuxiliaryVariablesInGPUMemory();
+void freeAuxiliaryVariablesInGPUMemory(int flag=0);
 
-float* calculateDRRwithCUDA(CUDAParamerters CUDA_Parameters, DRRParameters DRR_Parameters);
+float* calFloatDRRwithCUDA(CUDAParamerters CUDA_Parameters, DRRParameters DRR_Parameters);
+unsigned char* calUCharDRRwithCUDA(CUDAParamerters CUDA_Parameters, DRRParameters DRR_Parameters);
 

cuda-drr-socket/drr.cpp

@@ -63,6 +63,8 @@ drr::drr(std::string input)
 	PixelSpacingCT[1] = ctPixelSpacing[1];
 	PixelSpacingCT[2] = ctPixelSpacing[2];
 	loadDICOMInGPUMemory(cpp_object3D, SizeCT, PixelSpacingCT);
+	free(cpp_object3D);
+	cpp_object3D = NULL;
 	std::cout << "itk readfile :" << (double)clock() / CLOCKS_PER_SEC - time << std::endl;
 }
 
@@ -72,7 +74,7 @@ drr::~drr()
 	freeDICOMFromGPUMemory();
 }
 
-float* drr::cudaDRR(float rx, float ry, float rz, int dx, int dy, float threshold)
+float* drr::cudaFloatDRR(float rx, float ry, float rz, int dx, int dy, float threshold)
 {
 	InputImageType::PointType ori;
 	ori[0] = 0.0;
@@ -243,7 +245,7 @@ float* drr::cudaDRR(float rx, float ry, float rz, int dx, int dy, float threshol
 
 
 	loadOuputVariablesInGPUMemory((int)output_size[0],(int)output_size[1]);
-	float* object2d = calculateDRRwithCUDA(cudaPara, para);
+	float* object2d = calFloatDRRwithCUDA(cudaPara, para);
 
 
 	freeAuxiliaryVariablesInGPUMemory();
@@ -298,3 +300,182 @@ float* drr::cudaDRR(float rx, float ry, float rz, int dx, int dy, float threshol
 	
 
 }
+
+unsigned char * drr::cudaUCharDRR(float rx, float ry, float rz, int dx, int dy, float threshold)
+{
+	InputImageType::PointType ori;
+	ori[0] = 0.0;
+	ori[1] = 0.0;
+	ori[2] = 0.0;
+	image->SetOrigin(ori);
+
+	typedef itk::Euler3DTransform<double> TransformType;
+	TransformType::Pointer transform = TransformType::New();
+	TransformType::OutputVectorType translation;
+	translation[0] = 0;
+	translation[1] = 0;
+	translation[2] = 0;
+	const double dtr = (atan(1.0)*4.0) / 180.0;
+	transform->SetTranslation(translation);
+	//transform->SetComputeZYX(true);
+	transform->SetRotation(dtr*rx, dtr*ry, dtr*rz);
+
+	itk::Vector<double> SourceWorld;
+
+	typename InputImageType::SizeType sizeCT;
+	typename InputImageType::RegionType regionCT;
+	typename InputImageType::SpacingType ctPixelSpacing;
+	typename InputImageType::PointType ctOrigin;
+
+	ctPixelSpacing = image->GetSpacing();
+	ctOrigin = image->GetOrigin();
+	regionCT = image->GetLargestPossibleRegion();
+	sizeCT = regionCT.GetSize();
+	InputImageType::SizeType imSize = image->GetBufferedRegion().GetSize();
+
+	TransformType::InputPointType isocenter;
+	isocenter[0] = ctOrigin[0] + ctPixelSpacing[0] * static_cast<double>(imSize[0]) / 2.0;
+	isocenter[1] = ctOrigin[1] + ctPixelSpacing[1] * static_cast<double>(imSize[1]) / 2.0;
+	isocenter[2] = ctOrigin[2] + ctPixelSpacing[2] * static_cast<double>(imSize[2]) / 2.0;
+	transform->SetCenter(isocenter);
+
+	TransformType::Pointer m_InverseTransform = TransformType::New();
+	m_InverseTransform->SetComputeZYX(true);
+	TransformType::Pointer m_ComposeTransform = TransformType::New();
+	m_ComposeTransform->SetComputeZYX(true);
+	TransformType::Pointer m_GantryRoTransform = TransformType::New();
+	m_GantryRoTransform->SetComputeZYX(true);
+	m_GantryRoTransform->SetIdentity();
+	TransformType::Pointer m_CamShiftTransform = TransformType::New();
+	m_CamShiftTransform->SetComputeZYX(true);
+	m_CamShiftTransform->SetIdentity();
+	TransformType::Pointer m_CamRotTransform = TransformType::New();
+	m_CamRotTransform->SetComputeZYX(true);
+	m_CamRotTransform->SetIdentity();
+	float dtrf = (atan(1.0)*4.0) / 180.0;
+	m_CamRotTransform->SetRotation(dtrf*(-90.0), 0.0, 0.0);
+
+	m_ComposeTransform->SetIdentity();
+	m_ComposeTransform->Compose(transform, 0);
+	float rprojection = 90.;
+	float angle = -dtr * rprojection;
+	m_GantryRoTransform->SetRotation(angle, 2*angle, 0.);
+	m_GantryRoTransform->SetCenter(isocenter);
+	m_ComposeTransform->Compose(m_GantryRoTransform, 0);
+	TransformType::OutputVectorType focalpointtranslation;
+	focalpointtranslation[0] = -isocenter[0];
+	focalpointtranslation[1] = 400.0 - isocenter[1];
+	focalpointtranslation[2] = -isocenter[2];
+	//std::cout << isocenter[0] << " " << isocenter[1] << " " << isocenter[2] << endl;
+	//std::cout << focalpointtranslation[0] << " " << focalpointtranslation[1] << " " << focalpointtranslation[2] << endl;
+	m_CamShiftTransform->SetTranslation(focalpointtranslation);
+	m_ComposeTransform->Compose(m_CamShiftTransform, 0);
+	m_ComposeTransform->Compose(m_CamRotTransform, 0);
+
+
+
+	m_ComposeTransform->GetInverse(m_InverseTransform);
+
+	itk::Matrix<double> m_matrix = m_InverseTransform->GetMatrix();
+	itk::Vector<double, 3> m_offset = m_InverseTransform->GetOffset();
+
+	PointType m_SourcePoint;
+	m_SourcePoint[0] = 0.;
+	m_SourcePoint[1] = 0.;
+	m_SourcePoint[2] = 0.;
+	PointType tmp_SourceWorld;
+	m_InverseTransform->TransformPoint(m_SourcePoint);
+	tmp_SourceWorld = m_matrix * m_SourcePoint + m_offset;
+
+	itk::Matrix<double> m_direction = image->GetDirection();
+
+	//output_2d_image
+	double output_spacing[3];
+	output_spacing[0] = 0.3125;//sx
+	output_spacing[1] = 0.3125;//sy
+	output_spacing[2] = 1;
+	double output_size[3];
+	output_size[0] = dx;//dx
+	output_size[1] = dy;//dy
+	output_size[2] = 1.0;
+
+	itk::Vector<double> origin;
+	origin[0] = -output_spacing[0] * (output_size[0] - 1.) / 2.;
+	origin[1] = -output_spacing[1] * (output_size[1] - 1.) / 2.;
+	origin[2] = -400;
+
+	itk::Vector<double> corner00;
+	itk::Vector<double> cornerOrigin01;
+	itk::Vector<double> corner01;
+	itk::Vector<double> cornerOrigin10;
+	itk::Vector<double> corner10;
+
+	cornerOrigin01[0] = origin[0] + output_spacing[0] * (output_size[0] - 1.);
+	cornerOrigin01[1] = origin[1];
+	cornerOrigin01[2] = origin[2];
+
+	cornerOrigin10[0] = origin[0];
+	cornerOrigin10[1] = origin[1] + output_spacing[1] * (output_size[1] - 1.);
+	cornerOrigin10[2] = origin[2];
+
+	corner00 = m_matrix * origin + m_offset;
+	corner01 = m_matrix * cornerOrigin01 + m_offset;
+	corner10 = m_matrix * cornerOrigin10 + m_offset;
+	SourceWorld[0] = tmp_SourceWorld[0];
+	SourceWorld[1] = tmp_SourceWorld[1];
+	SourceWorld[2] = tmp_SourceWorld[2];
+
+	itk::Vector<double> stepInX;
+	stepInX[0] = (corner01[0] - corner00[0]) / (output_size[0]);
+	stepInX[1] = (corner01[1] - corner00[1]) / (output_size[0]);
+	stepInX[2] = (corner01[2] - corner00[2]) / (output_size[0]);
+	itk::Vector<double> stepInY;
+	stepInY[0] = (corner10[0] - corner00[0]) / (output_size[1]);
+	stepInY[1] = (corner10[1] - corner00[1]) / (output_size[1]);
+	stepInY[2] = (corner10[2] - corner00[2]) / (output_size[1]);
+
+	DRRParameters para;
+	para.stepInX[0] = stepInX[0];
+	para.stepInX[1] = stepInX[1];
+	para.stepInX[2] = stepInX[2];
+	para.stepInY[0] = stepInY[0];
+	para.stepInY[1] = stepInY[1];
+	para.stepInY[2] = stepInY[2];
+	para.corner00[0] = corner00[0];
+	para.corner00[1] = corner00[1];
+	para.corner00[2] = corner00[2];
+	para.SourceWorld[0] = SourceWorld[0];
+	para.SourceWorld[1] = SourceWorld[1];
+	para.SourceWorld[2] = SourceWorld[2];
+	para.size[0] = output_size[0];
+	para.size[1] = output_size[1];
+	para.threshold = threshold;
+
+
+	Image3D image3d;
+	image3d.image = cpp_object3D;
+	image3d.isoCenter[0] = isocenter[0];
+	image3d.isoCenter[1] = isocenter[1];
+	image3d.isoCenter[2] = isocenter[2];
+	image3d.PixelSpacingCT[0] = ctPixelSpacing[0];
+	image3d.PixelSpacingCT[1] = ctPixelSpacing[1];
+	image3d.PixelSpacingCT[2] = ctPixelSpacing[2];
+	image3d.SizeCT[0] = sizeCT[0];
+	image3d.SizeCT[1] = sizeCT[1];
+	image3d.SizeCT[2] = sizeCT[2];
+
+	CUDAParamerters cudaPara;
+	cudaDeviceProp prop;
+	cudaGetDeviceProperties(&prop, 0);
+	cudaPara.numThreads = prop.maxThreadsPerBlock;
+	cudaPara.numBlocks = (int)ceil((float)output_size[0] * output_size[1] / cudaPara.numThreads);
+
+
+	loadOuputVariablesInGPUMemory((int)output_size[0], (int)output_size[1], 1);
+	unsigned char* object2d = calUCharDRRwithCUDA(cudaPara, para);
+
+
+	freeAuxiliaryVariablesInGPUMemory(1);
+
+	return object2d;
+}

cuda-drr-socket/drr.h

@@ -43,7 +43,8 @@ public:
 	drr(std::string path);
 	~drr();
 
-	float* cudaDRR(float rx, float ry, float rz, int dx, int dy, float threshold);
+	float* cudaFloatDRR(float rx, float ry, float rz, int dx, int dy, float threshold);
+	unsigned char* cudaUCharDRR(float rx, float ry, float rz, int dx, int dy, float threshold);
 
 	itk::ImageSeriesReader< itk::Image< float, 3 > >::Pointer reader;
 	itk::Image<float, 3>::Pointer image;

cuda-drr-socket/main.cpp

@@ -10,9 +10,19 @@ using namespace std;
 
 
 int main() {
-	//_drr_cuda_();
+	cout << "*******************************************************************************" << endl;
+	cout << " Please connect the socket." << endl;
+	cout << " Help: " << endl;
+	cout << " Send the message \"CT(__folder_path__)\" for loading a CT sequence." << endl;
+	cout << "     Client will receive the message to inform if the operation is completed." << endl;
+	cout << " Send the message \"PARA(rx,ry,rz,dx,dy,threshold,flag)\" for generating a DRR image." << endl;
+	cout << "     rx,ry,rz(float) are the rotation angle for the DRR image." << endl;
+	cout << "     dx,dy(int) are the width and height of the DRR image." << endl;
+	cout << "     threshold(float) can filter the required pixels for DRR images." << endl;
+	cout << "     flag(int) can decide the type of DRR array. 0 for float while 1 for unsigned char." << endl;
+	cout << "     Client will receive a DRR array if the operation is completed." << endl;
+	cout << "*******************************************************************************" << endl;
 	socketManager* m = new socketManager;
 	m->open_socket();
-	system("pause");
 	return 0;
 }
\ No newline at end of file

cuda-drr-socket/socketManager.cpp

@@ -10,8 +10,8 @@ socketManager::socketManager()
 
 socketManager::~socketManager()
 {
-	delete CTpath;
-	delete rd;
+	free(CTpath);
+	free(rd);
 }
 
 void socketManager::get_CUDAdrr(const char * path)
@@ -23,11 +23,18 @@ void socketManager::get_CUDAdrr(const char * path)
 	rd = new drr(path);
 }
 
-float* socketManager::get_DRR(float rx, float ry, float rz, int dx, int dy, float threshold)
+float* socketManager::get_FloatDRR(float rx, float ry, float rz, int dx, int dy, float threshold)
 {
 	if (rd == NULL)
 		return NULL;
-	return rd->cudaDRR(rx, ry, rz, dx, dy, threshold);
+	return rd->cudaFloatDRR(rx, ry, rz, dx, dy, threshold);
+}
+
+unsigned char* socketManager::get_UCharDRR(float rx, float ry, float rz, int dx, int dy, float threshold)
+{
+	if (rd == NULL)
+		return NULL;
+	return rd->cudaUCharDRR(rx, ry, rz, dx, dy, threshold);
 }
 
 
@@ -63,11 +70,17 @@ void socketManager::open_socket() {
 					}
 					CTpath[ret - 4] = '\0';
 					/////// 导入CT数据
+					try {
 						get_CUDAdrr(CTpath);
-					const char* msg = "ct upload succeed";
+					}
+					catch(exception& e){
+						printf("Failed to load the CT sequence\n");
+						break;
+					}
+					const char* msg = "ct imported successfully";
 					send(sClient, msg, strlen(msg), 0);
 					///////
-					printf("Received [%d bytes]: '%s'\n", ret - 3, CTpath);
+					printf("CT imported successfully :'%s'\n", ret - 3, CTpath);
 				}
 				else if (szMessage[0] == 'P' && szMessage[1] == 'A' &&
 					szMessage[2] == 'R' && szMessage[3] == 'A' &&
@@ -75,11 +88,25 @@ void socketManager::open_socket() {
 					double time = (double)clock() / CLOCKS_PER_SEC;
 					float * data = handleString(szMessage, ret);
 					//////// 生成DRR
-					float* object2D = get_DRR(data[0],data[1],data[2],(int)data[3],(int)data[4],data[5]);
-					send(sClient, (char*)object2D, sizeof(float)*(int)data[3]*(int)data[4], 0);
+					try {
+						if ((int)data[6] == 0) {
+							float* object2D = get_FloatDRR(data[0], data[1], data[2], (int)data[3], (int)data[4], data[5]);
+							send(sClient, (char*)object2D, sizeof(float)*(int)data[3] * (int)data[4], 0);
+							free(object2D);
+						}
+						else {
+							unsigned char* object2D = get_UCharDRR(data[0], data[1], data[2], (int)data[3], (int)data[4], data[5]);
+							send(sClient, (char*)object2D, sizeof(unsigned char)*(int)data[3] * (int)data[4], 0);
+							free(object2D);
+						}
+					}
+					catch (exception& e) {
+						printf("Failed to generate DRR, please check your parameters.\n");
+						break;
+					}
 					////////
-					printf("Create DRR image succeed: [%f, %f, %f, %d, %d, %f]\n", data[0], data[1], data[2], (int)data[3], (int)data[4], data[5]);
-					std::cout << "during drr :" << (double)clock() / CLOCKS_PER_SEC - time << std::endl;
+					printf("Create DRR image succeed: [%f, %f, %f, %d, %d, %f] ", data[0], data[1], data[2], (int)data[3], (int)data[4], data[5]);
+					std::cout << ", time :" << (double)clock() / CLOCKS_PER_SEC - time << "s" << std::endl;
 				}
 				break;
 			}
@@ -89,12 +116,12 @@ void socketManager::open_socket() {
 }
 
 float* socketManager::handleString(char* szMessage, int ret) {
-	float data[6];
+	float data[7];
 	int k = 0;
 	char* buf = new char[1024];
 	int j = 0;
 	for (int i = 5; i < ret - 1; i++) {
-		if (szMessage[i] != ',' && k < 6) {
+		if (szMessage[i] != ',' && k < 7) {
 			buf[j] = szMessage[i];
 			j++;
 		}

cuda-drr-socket/socketManager.h

@@ -19,7 +19,8 @@ public:
 	~socketManager();
 	void open_socket();
 	void get_CUDAdrr(const char* path);
-	float* get_DRR(float rx, float ry, float rz, int dx, int dy, float threshold);
+	float* get_FloatDRR(float rx, float ry, float rz, int dx, int dy, float threshold);
+	unsigned char* get_UCharDRR(float rx, float ry, float rz, int dx, int dy, float threshold);
 	float* handleString(char* szMessage, int ret);
 
 private:

test/main.cpp

@@ -2,6 +2,8 @@
 #include <Windows.h>
 #include <stdio.h>
 #include <string>
+#include <opencv2\opencv.hpp>
+#include <opencv2/imgproc/types_c.h>
 #pragma warning(disable:4996)
 #pragma comment(lib, "WS2_32.lib")
 using namespace std;
@@ -32,7 +34,7 @@ void sendCTPath(const char* path) {
 	WSACleanup();
 }
 
-float* sendPara(float rx, float ry, float rz, int dx, int dy, float threshold) {
+void sendPara(float rx, float ry, float rz, int dx, int dy, float threshold, int flag) {
 	WSADATA wsaData;
 	SOCKET sClient;
 	SOCKADDR_IN server;
@@ -44,28 +46,32 @@ float* sendPara(float rx, float ry, float rz, int dx, int dy, float threshold) {
 	server.sin_port = htons(PORT);
 	server.sin_addr.s_addr = inet_addr(SERVER_ADDRESS);
 	connect(sClient, (struct sockaddr*)&server, sizeof(SOCKADDR_IN));
-	string msg = "PARA(" + to_string(rx) + "," + to_string(ry) + "," + to_string(rz) + "," + to_string(dx) + "," + to_string(dy) + "," + to_string(threshold) + ")";
+	string msg = "PARA(" + to_string(rx) + "," + to_string(ry) + "," + to_string(rz) + "," 
+		+ to_string(dx) + "," + to_string(dy) + "," + to_string(threshold) + ","+ to_string(flag)+ ")";
 	const char* szMessage = msg.c_str();
 	send(sClient, szMessage, strlen(szMessage), 0);
-	float* recvbuf = (float*)malloc(sizeof(float)*dx*dy);
-	recv(sClient, (char*)recvbuf, sizeof(float)*dx*dy, 0);
+	unsigned char* recvbuf = (unsigned char*)malloc(sizeof(unsigned char)*dx*dy);
+	recv(sClient, (char*)recvbuf, sizeof(unsigned char)*dx*dy, 0);
 	printf("receive drr(%f,%f,%f,%d,%d,%f)\n", rx, ry, rz, dx, dy, threshold);
 	closesocket(sClient);
 	WSACleanup();
-	return recvbuf;
+	
+	cv::Mat gray1_mat(dx, dy, CV_8UC1, recvbuf);
+	cv::imshow("123", gray1_mat);
+	cv::waitKey(0);
 }
 
 int main() {
-	sendCTPath("D:/QT/CTxray/CT1/CT");
-	float* object2D = sendPara(90, 0, 0, 1024, 1024, 0);
-	object2D = sendPara(90, 25, 0, 1024, 1024, 0);
-	object2D = sendPara(90, 0, 77, 1024, 1024, 0);
-	object2D = sendPara(40, 4, 0, 1024, 1024, 0);
-	object2D = sendPara(90, 66, 0, 1024, 1024, 0);
-	object2D = sendPara(30, 0, 60, 1024, 1024, 0);
-	object2D = sendPara(45, 45, 0, 1024, 1024, 0);
-	object2D = sendPara(45, 70, 0, 1024, 1024, 0);
-	object2D = sendPara(77, 60, 0, 1024, 1024, 0);
+	sendCTPath("D:/CT1/CT");
+	sendPara(90, 0, 0, 1024, 1024, 0, 1);
+	sendPara(90, 25, 0, 512, 512, 0, 1);
+	sendPara(90, 0, 77, 1024, 1024, 0, 1);
+	sendPara(40, 4, 0, 1024, 1024, 0, 1);
+	sendPara(90, 66, 0, 1024, 1024, 0, 1);
+	sendPara(30, 0, 60, 1024, 1024, 0, 1);
+	sendPara(45, 45, 0, 1024, 1024, 0, 1);
+	sendPara(45, 70, 0, 512, 512, 0, 1);
+	sendPara(77, 60, 0, 512, 512, 0, 1);
 	system("pause");
 	return 0;
 }
\ No newline at end of file